Patricia M. DeMarco
December 21, 2018
Presentation is on video by Blue Lens, LLC : https://youtu.be/iJrSADqS9pA
Our beautiful, fragile, resilient Living Earth provides everything we need to survive and thrive. All the living things on the planet have co-evolved forming an interconnected web of life with a life support system that provides oxygen-rich air, fresh water, and fertile ground. The functions of the living earth – ecosystem services – support life with elegance and simplicity following the laws of Nature. These laws were discovered to human knowledge over many years but still hold many mysteries. The laws of Nature – the principles of chemistry, physics, biology, ecology- are not negotiable, whether humans acknowledge them or not. The human enterprise has brought the delicate balance of the natural world under acute stress in modern times. Overpopulation, resource extraction for minerals and materials, fossil fuel combustion, and hyper-consumption now threaten the stability of our existence. Global warming from the accumulation of greenhouse gases, especially carbon dioxide and methane; and global pollution, especially from plastics, now threaten life on Earth as we have known it. 
If the goal of our entire civilization is to achieve sustainability for future generations, some adjustments must be made in the way people relate to the natural world. In a sustainable condition, “people meet the needs of today without compromising the ability of future generations to meet their own needs.”This condition of sustainability has a balance among environmental values, social and cultural values and economic values. In today’s civilization, the economic values far outweigh environment and social values, leading to an increase in environmental degradation and social inequity. The damages are distributed unevenly around the globe, with those least responsible for creating the problem most affected by the results of climate change. The children, non-human living things and those unborn of the next generation will pay the heaviest price for decisions made today. Therefore, this is not a technology issue; rather it is a moral and ethical issue: are our decisions going to preserve the wealth and privilege of the fossil industry corporations, or will our decisions move to preserve a viable planet for our children?
Nothing characterizes modern life so well as plastic – long-lasting, resilient, malleable, diverse in applications and uses. We find plastic everywhere from food containers to personal care products, structural materials, fibers and finishes. Whether single use products like plastic bags or structural materials like car dashboards or PVC pipe, all plastics are made from materials found in fossil fuels- natural gas and petroleum. The plastics industry burst forth in the decade following the end of World War II when the industrial might amassed for munitions turned to domestic products like fertilizer, herbicides, pesticides, and plastics. Worldwide 8.3 billion tons of plastic have been produced since then, and over half of that material has been discarded as waste. The problem is only expected to grow as plastic production increases exponentially—from a mere two million metric tons annually in 1950 to more than 300 million metric tons today, and a projected 33 billion metric tons each year by 2050.
Plastics are made of long-lived polymers, they do not break down easily in the environment, neither in landfills nor in the oceans. Plastics are not readily broken down by biological systems- they are indigestible and provide no nutrition when introduced into food chains. Nearly all the plastic ever made is still in the biosphere.Worldwide, factories produce 400 million tons of plastic per year, with plastic bottles produced at a rate of 20,000 per second.Globally, 60% of all plastics ever produced were discarded and are accumulating in landfills or in the natural environment. Americans discard 33.6 million tons of plastic a year; only 6.5% of plastic is recycled for re-use, and 7.7% is burned in trash to energy facilities.Until 2018, most of American recycled plastic was collected as mixed waste and sent to China for processing. However, China is no longer accepting material with more than 1% contamination for recycling.So, most of the plastic waste generated in America is now destined for landfill. Worldwide, plastic demand is expected to drive petroleum and natural gas production to use for feed stocks for many decades, especially to serve growing markets in Asia.
The ubiquitous contamination of the earth from man-made plastics presents a system problem. We need to seek a systematic solution.The problem of global pollution from plastics has three components: 1. Economic Issues; 2. Environmental and health issues; and 3. Ethics Issues.
1. Economic issue: The entire plastics enterprise is based on taking fossil derived raw material extracted from natural gas and petroleum deep underground, refining the products and producing polymers, forming the polymers into the desired product, distributing and trucking to the wholesale and retail operations for a product that is often used once and discarded.
Image from PA Department of Commerce and Economic Development https://dced.pa.gov/key-industries/plastics/
This system only works economically when fossil fuels are valued at a relatively low price, and no cost is imposed on the discarded or wasted material. This approach is entirely incompatible with a sustainable society. In many situations, the fossil extraction and production phases are heavily subsidized, and the single-use products are inexpensive to the users, or costs are unseen, as with plastic packaging or plastic bags at the retail check-out counter. In 2014, UN Environment Programme estimated the natural capital cost of plastics, from environmental degradation, climate change and health, to be about $75 billion annually.As of 2018, the hydraulic fracturing sector of the oil and gas industry continued its nine-year streak of cash losses. In 2018 Third Quarter, a cross section of 32 publicly traded fracking-focused companies spent nearly $1 billion more on drilling and related capital outlays than they generated by selling oil and gas.The fracking industry is anticipating the ultimate sale of gas liquids for plastic production in refineries, such as the proposed Shell Appalachia Project, to generate positive revenue from sales of plastic pellets for production of consumer goods, many of the single-use packaging like plastic bottles, bags and flatware.
2. Environment and Health Issue
Many plastics and by-products of their production are directly toxic to humans and other living things. Some are also disruptors of endocrine functions, such as by mimicking hormone activity yielding results that over-stimulate or suppress normal hormone functions. Such compounds have been associated with reproductive and developmental disorders, obesity, fertility, and neurologic disorders. Over 80,000 synthetic chemicals are in common commercial use; of these only 200 have been directly tested for health effects. It is nearly impossible to avoid exposure to chemical contaminants- they are in BPA plastic packaging for food and containers, in consumer products phthalates and parabens as well as plastic microbeads are common; fire retardants in upholstery, curtains, and electronics expose people to PBDE (Poly-brominated di-phenyl ethers), and residues of long abolished chemicals like PCB (used in insulation oil for transformers and banned in 1979) continue to contaminate the food chain.
Should we be concerned? Industry advocates argue that there is no “proof of harm” that any particular chemical caused a specific instance of illness or disease. But human epidemiology studies are uniquely challenging because individuals respond differently to the same exposure, and the effects can vary widely for children, elderly, and especially unborn fetus development. Furthermore, people are not exposed to one chemical at a time but experience a chemical stew of myriad chemicals, some without their knowledge. The use of animal models where some of the variables can be controlled present problems as well, especially in court where the industry defense can argue that animals are not exactly like humans, and reasonable doubt prevents a clear ruling of harm. The burden of proof is on the consumer, and the case is rarely successful.
People are exposed as minute quantities of potentially harmful materials are magnified through the food chain. Observations in the field conflict with rosy promotion of the benefits of plastics. Attempts to move legislation to protect consumers and prevent widespread exposures to questionable materials become bogged down in a regulatory quagmire. Citizen action groups use information campaigns and argue for better testing, but as industry experts infiltrate the regulatory agencies, the credibility of government agencies is eroding.
3. Ethics Issue
The entire matter of global pollution, especially from plastics products and the by-products associated with their production, is a question of moral commitment to preserve the life support systems of the Earth, or to allow destruction of the living part of the planet for the sake of short-term profit for a very few corporate interests. It is really a matter of asserting the right for life to EXIST! The surge in plastic use, especially single-use plastics like plastic bags for purchased items, developed as a consumer convenience. But we are seeing now the unintended consequences of convenience. But is it really from convenience that we see 48 tons of garbage, mostly plastic containers and packaging, left in the parking lot after a concert?Is this convenience, or is it really a consumer sense of entitlement and total oblivious disregard for the consequences of their actions? The freedom to act as we wish without the sense of responsibility for the consequences of our actions yields chaos. As we see the cumulative effects of single-use plastics in the environment, in fish and sea creatures, and even in human bodies, we must begin to question the obligation to control this material at its source. Recognizing that the source is a fossil-based feed stock, the need to re-think plastic reaches a higher plane. Are we killing our planet for convenience?
As horrific images begin to filter into the media, people are beginning to move from awareness to action. The plastic problem will not go away without fundamental changes in expectations and the reality of packaging and single-use materials. According to a United Nations Environment Programme study: “To get the plastics problem under control, the world has to take three primary steps. In the short- term society needs to significantly curtail unnecessary single-use plastic items such as water bottles, plastic shopping bags, straws and utensils. In the medium -term governments need to strengthen garbage collection and recycling systems to prevent waste from leaking into the environment between the trash can and the landfill, and to improve recycling rates. In the long run scientists need to devise ways to break plastic down into its most basic units, which can be rebuilt into new plastics or other materials.”Three kinds of solutions present good options for re-thinking how we develop, use and dispose of plastic:1. Restructure the Value System;2. Use Green Chemistry to prevent environmental and health harms;3. Take precaution in protecting living systems.
1. Restructure the Value System
To the consumer, and to many manufacturers, plastic looks cheap. The price of the oil or natural gas liquids used as feed stocks for plastic are way too low, compared to the actual cost to extract, refine, process and transport the plastic products. And, it is cheaper to produce plastic from virgin material than from recycled plastics because recycled material needs to be cleaned, sorted, and is difficult to define precisely. Plastic was designed to melt at temperatures lower than metals, so metal molds can be used repeatedly to shape plastic into products, conserving the capital needed for the machinery, while using a relatively cheap ingredient. Oil and natural gas have significant price supports for extraction and production embedded in the laws, tax treatments, and land uses that have supported the supremacy of mineral rights since 1837. These subsidies have kept the apparent cost of fossil based products artificially low.The system is set up to reward manufacturers for producing products in the form of profits, but to impose the cost of disposal of waste on the taxpayers. The system gives economic incentives for turning raw (fossil) material into trash as rapidly as possible. Thus, the cost of the entire life cycle of the plastic is not included in the price of the product. If the full life cycle cost of the extraction, production and disposal or recapture of the plastic were included in the price the consumer sees, plastics would not seem so inexpensive, and there would be a greater incentive to avoid waste. In a circular model of materials management, incentives for designing products to be re-used or recaptured and re-purposed would reduce the waste.
Plastics also seems inexpensive because much of the cost of their production and use is not counted at all. The Gross Domestic Product, one of the most common measures of the economy, does not include the value if services provided by the living earth… essential things like producing oxygen, regenerating fresh water, and providing food, fuel and fiber from natural materials. The Gross National Product as measured for the global economy is about $19 Trillion (US Dollar equivalent) while the services provided by ecosystems have a value of $33 Trillion globally.By comparison, the global plastics industry is valued at $1.75 trillion, growing at an expected 3% annually.The degradation of ecosystems and ignoring the value of essential services we take for granted has allowed products like fossil fuels and plastics derived from fossil origins to seem cheap, when in fact, their use is destroying the priceless life support system of planet Earth. The artificially cheap price of plastics has contributed to the hyper-consumption that is clogging our landfills and oceans with wasted materials that may never completely break down to innocuous components. One large part of the solution would be to adjust the value calculation to reflect the true cost.
2. Use Green Chemistry to prevent environmental and health harms
Just as plastics were engineered to resist breaking down, materials can be designed to serve useful functions without the biological and physical characteristics that make plastics a problem when they interact with living systems. Risk to health and to the environment is a function of the inherent hazard and the exposure to the hazard. The current regulatory system that controls environmental and health risks from chemicals and materials is based on limiting the amount of exposure, or emissions into the environment. Thus, even very toxic materials can be deemed “safe” if they are limited to a very small release. Under this system, over 5.2 billion pounds of toxic or hazardous material is emitted into the air and water by permit each year.Green chemistry takes the approach of designing chemicals and materials to have inherently benign characteristics. Thus, the risk is reduced by reducing or eliminating the inherent hazard itself, instead of trying to limit the exposure.
Green chemistry uses the kind of processes found in nature- ambient temperature and pressure, catalysts and enzymes, biological processes, and non-toxic ingredients and by-products.Creative application of green chemistry principles has produced exciting innovations and has the potential for changing the way we produce and use materials.Green chemistry uses bio-mimicry as an inspiration for making new materials. Using catalysts simulating the processes of living systems to address the breakdown of organic chemical contaminants has proven productive. Using plant-based feed stocks instead of fossil resources has produced many innovations in both pharmaceutical applications and in materials. The whole field of bio-plastic is emerging with very promising innovations using algae, hemp, and bamboo. Taking the approach to design for benign, or even helpful, effects on the natural world will revolutionize materials management.The waste stream is part of the cost. The circular economy that can emerge offers productive and sustainable ways to meet the need for materials without increasing the burden on living systems from materials that cannot be used or broken down by living systems.
3. Precaution in protecting living systems
The problem of global pollution from plastics will not go away without specific and deliberate intervention both from individuals and from governments. An ethic that places value on retaining and re-using materials that will not degrade in the environment must replace the expectation of convenience regardless of the true cost. The demand for convenience has come at a terrible price for the oceans, for the health and well-being of millions of creatures, including people. For the millions of people for whom using plastic is the only choice for clean water, or single-servings of essential items of food or sanitation, the systemic problems of wealth distribution must be addressed. There is an obligation upon the industrialized societies to resolve the material problem created initially as a by-product of industrialization. Making massive amounts of plastics without considering the implications of their disposal places an ethical burden upon the producers to protect the living systems that are being choked by the waste. Waste has become a cultural norm of modern life, but it is not a condition that can persist if survival of life on the planet is to be sustained.
The regulatory system must also be adjusted to require independent testing for health and biological effects in advance of mass production, not only after consumer complaints materialize. The burden of proof of safety must rest on the producer, not on the consumer. It is critical to protect workers from chronic exposures and to evaluate by-products and wastes for the potential to cause harm as well.
Consumers have a role to play in moving both the markets and the regulatory infrastructure of plastic. In re-thinking plastic, we can refuse single-use plastics. Ask yourself how materials will be disposed of at the point of purchase. Plan ahead when shopping to take a reusable bag, water bottle, cutlery with you. When in a restaurant, before the server brings anything just say, “No plastic, please,” and you will not have a plastic straw. You can carry bamboo or re-usable straws with you easily. While some situations may be challenging, it can become a focus for family joint activity to seek creative ways to avoid plastic in everyday functions. (You may find helpful suggestions here: https://myplasticfreelife.com/plasticfreeguide/)
It is important for consumers to communicate to manufacturers and stores that the excessive plastic used in packaging everything is not acceptable. Challenge the grocery manager for wrapping individual vegetables in shrink-wrap. Ask for less packaging, and bring your own for as many items as you can. Obtain re-usable containers for storing produce and other foods at home instead of plastic wrap, bags or single-use containers. For things like yogurt or other dairy products, re-use the plastic containers for storage, re-purpose them for take-out containers; or craft projects. A little preventive thinking can eliminate much of the single-use waste stream: No K-Cups- use a single serve brass insert instead. Get out of the habit of buying beverages in plastic bottles. Cook real food to avoid excess packaging and choose bulk food items.
Re-use and re-purpose as many items as possible. It is becoming fashionable again to use real dishes and glassware and cutlery. These need not be heirloom porcelain to be effective, and dishwashers without the heat element use less resources than the extraction, production and disposal of plastic goods. Choose quality forever items. You can swap or re-design clothing and visit consignment shops, especially for things that you will wear infrequently.
It is more important than ever to recycle correctly. Many recycling requirements have changed recently, as mixed waste streams are harder to separate into useable product lines. It is most important to avoid Poly Vinyl Chloride (PVC), Styrofoam and styrene because these are the most difficult to recycle, and they have a 450-year life in the landfill. These materials are especially noxious when they arrive in the ocean, delivered there from materials washed down to the rivers and through the waterways to the ocean. Remember that the Mississippi River drainage covers more than one third of the U.S. land. Clean plastic for recycling and separate it from non-recyclable trash. Cross-contamination will disqualify an entire load. Recycle electronics at a recapture facility where the components are recovered and returned to the production cycle. These are not always free, but the cost is an important part of moving to a circular economy.
Finally, to protect the living systems of the planet, it will be important for consumers to support policies that require less packaging, establish markets and procedures for recovery and re-use of materials, and align the value to reflect the true life-cycle cost of the plastic burden on the Earth.
The Moral Imperative
America operates under the banner of freedom, but has not embraced the concept that freedom without taking responsibility for consequences yields chaos. Technology used without accountability and wisdom yields disaster. We are seeing all around us today the unintended consequences of convenience. It is time to take responsibility for the trash. Everyone can dispose of plastic responsibly- litter kills. We can connect to the natural world and recognize its true value to our life, our survival, and the dependence we have as humans on all the other living things with which we share this time and space. We can find the courage to defend and protect the living Earth
Citations and Sources:
DeMarco, Patricia. “Listening to the Voice of the Earth.” Pathways to Our Sustainable Future- Global Perspective from Pittsburgh.2017. (University of Pittsburgh Press, Pittsburgh) Pages 13 to 35.
Andrea Thompson. “Solving Microplastic PollutionMeans Reducing, Recycling – And Fundamental Re-thinking.” Scientific American November 12, 2018. https://www.scientificamerican.com/article/solving-microplastic-pollution-means-reducing-recycling-mdash-and-fundamental-rethinking1/?utm_source=newsletter&utm_medium=email&utm_campaign=policy&utm_content=link&utm_term=2018-11-12_featured-this-week&spMailingID=57769378&spUserID=MzUxNTcwNDM4OTM1S0&spJobID=1521540986&spReportId=MTUyMTU0MDk4NgS2 Accessed December 18, 2018.
Laura Parker. “China’s Ban of Plastic Trash Imports Shifts Waste Crisis to Southeast Asia and Malaysia.” National Geographic. November 16, 2018. https://www.nationalgeographic.com/environment/2018/11/china-ban-plastic-trash-imports-shifts-waste-crisis-southeast-asia-malaysia/China refusal of mixed plastic waste
UNEP. 2014. Valuing plastics: the business case for measuring, managing and disclosing plastic use in the consumer goods industry. United Nations Environment Programme. https://wedocs.unep.org/rest/bitstreams/16290/retrieve
Clark Williams-Derry. “Nine-Year Losing Streak Continues for US Fracking Sector.” Sightline. December 5, 2018. www.sightline.org.)
 Irfan A. Rather et. Al. “The Sources of Chemical Contaminants in Food and their Health Implications.” Frontiers in Pharmacology. 2017. 8:830 https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5699236/
Sam Levin and Patrick Greenfield. “Monsanto Ordered to Pay $289 million as Jury Rules Weedkiller Caused Man’s Cancer.” The Guardian. August 11,2018. https://www.theguardian.com/business/2018/aug/10/monsanto-trial-cancer-dewayne-johnson-ruling
UNEP. 2014. Valuing plastics: the business case for measuring, managing and disclosing plastic use in the consumer goods industry. United Nations Environment Programme. https://wedocs.unep.org/rest/bitstreams/16290/retrieve
Costanza, R., R. de Groot, L. Braat, I. Kubiszewski, L. Fioramonti, P. Sutton, S. Farber, and M. Grasso. 2017. “Twenty years of ecosystem services: how far have we come and how far do we still need to go?” Ecosystem Services. 28:1-16.
Clare Goldsberry. “Global market for plastic products to reach $1.175 trillion by 2020” BusinessExtrusion: Film & Sheet, Extrusion: Pipe & Profile, Injection Molding. December 17, 2017 https://www.plasticstoday.com/author/clare-goldsberryAccessed December 19, 2018.
For an explanation of Green Chemistry Principles see Paul Anastas and John Warner. 12 Design Principles of Green Chemistry. American Chemical Society. https://www.acs.org/content/acs/en/greenchemistry/principles/12-principles-of-green-chemistry.html
DeMarco, Patricia. 2017. “Preventing Pollution.” Pathways to Our Sustainable Future – A Global Perspective from Pittsburgh. (University of Pittsburgh Press. Pittsburgh PA) Page140-169.
Lord, R. 2016. Plastics and sustainability: a valuation of environmental benefits, costs and opportunities for continuous improvement. Trucost and American Chemistry Council. https://plastics.americanchemistry.com/Plastics-and-Sustainability.pdf
A detailed description of the circular economy can be found in EMF, 2013. Towards a circular economy – opportunities for the consumer goods sector. Ellen MacArthur Foundation. https://www.ellenmacarthurfoundation.org/assets/downloads/publications/TCE_Report-2013.pdf